If your flight originates from an airport not in the Schengen area and you are flying into an airport that is in the Schengen area, including airports in Spain, when you reach the terminal check on the information screens for the boarding gate your flight will depart from and follow the instructions for going through passport control. Having done this, you should go down the stairs or take the lift down to the train platform where the APM will take you to the Main Building, which is where boarding gates H, J and K are found. Remember that the entire process requires a time of between 20 and 30 minutes, so we recommend you don’t linger in the transit area.
Very rarely, your
connecting flight will depart from the M gates. In this case we ask you to follow the signs at the airport, as you will not have to change terminal.
This table shows information about No Schengen / Schengen flights
From Non-Schengen to Schengen | | | |
---|
Arrival Terminal | Departure Terminal | Information | Time required |
---|
T4 S - Gates S | T4 - Gates HJK | *Transfer needed between terminal T4S and terminal T4 | 20 to 30 minutes |
T4 S - Gates S | T4 S - Gates M | *No change of terminal | 20 minutes
|